Metallic Suede

VELVETY-MATTE METALLIC
STUCCO

Boero Metallic Suede provides the look and feel of suede with a subdued, matte metallic influence and is available in an endless array of colors. This durable light weight, gel-plaster finish is water-based, low VOC and comes in four tintable bases; Pearl, Aluminum, Gold and Transparent.

The Boero Metallic Suede creates a velvety, matte metallic stucco effect that can be applied using a microfiber roller, then Back-Troweled or Troweled directly to the walls and ceilings.

 

 

Technical  data sheet (pdf)
Colour card (pdf)
Brochure (pdf)


How-To Video  How-To Video

Colors and effects

 

Custom colors available
All colors shown on this colour card are merely indicative.

1 SUBSTRATE PREPARATION

Substrates must be sound, dry, clean and as smooth as possible. Tape off adjacent surfaces with the proper low tack tape. Patch serious imperfections, deficiencies, etc., with Boero Water-Resistant Gypsum Powder.
Application of Basecoat
Apply 2 coats of an eg-shel paint in a similar color to the Boero Metallic Suede color.

2 APPLICATION OF METALLIC SUEDE

The Boero Metallic Suede creates a velvety, matte metallic stucco effect that can be applied using a microfiber roller, then Back-Troweled or Troweled directly to the surface. Product is ready to use.
Roller & Back-Trowel: Using a microfiber, mini roller in corners and edges and a 9” microfiber roller in the large areas, apply the Boero Metallic Suede in random rolled directions (up, down and diagonally, creating random “curving X’s”). Immediately “Back-Trowel” using a Boero Stainless-Steel Flex Trowel to create the random pattern. You may also leave the roller texture to create a Random Rolled Pattern.

3 EFFECT

Trowel: You may apply the Boero Metallic Suede directly to the surface using a Boero Stainless-Steel Flex Trowel in a random “curving X’s” to create your desired pattern.
Brushed Effect: You may apply Boero Metallic Suede by brush for a Brushed Effect.
Final Step: Allow the Boero Metallic Suede to dry and if necessary apply a tight skim coat of the Boero Metallic Suede, using the Boero Stainless-Steel Flex Trowel in a random “curving X’s” to create your desired pattern. If a second coat is not required, gently burnish/compress/polish the finish to highlight the pattern and effect.

TECHNICAL INFORMATION

COVERAGE: 250-325 sq ft / U.S. gal (depending on the substrate and the thickness applied).
DILUTION: Ready to use.
DRYING (at 70°F and 65% H.R.):
Touch dry: 1-2 hours.
Fully dry: 18-24 hours.
TOOLS: Roller, brush, Boero Stainless-Steel Flex Trowel.
TOOLS CLEANING: Clean tools immediately after use with water.
STORAGE TEMPERATURE: Keep the product in a cool place and do not allow to freeze. Do not apply at temperatures below 40°F.
V.O.C.: Max. 250 g/L (2.09 lbs/gal)

We suggest these products for a perfect application cycle

GYPSUM POWDER

Water Resistant Stucco in Powder

The Boero Water Resistant, Gypsum Powder is the perfect finishing product for bare sheetrock installed in high humidity and coastal environments. This coating is compatible with water-base primers and paints.
This “industry-first” combination of Boero Water Resistant, Gypsum Powder with Boero Stain Resistant Texture provides a wall and ceiling finishing system that is extremely resistant to the affects continued exposure to water and high humidity. This breathable, mold resistant finishing system is prefect for bathrooms, spa rooms, all ceilings and walls in coastal environments continually exposed to high levels of moisture and constant humidity.

Details


CLEARCOAT MATTE

Water-Based protective Clearcoat

Protective clearcoat, available in matte version, based on polyurethane polymers in a water dispersion, featuring high hardness and excellent adhesion. Non-yellowing and resistant to aggressive external agents, including UV radiation, thanks to protective filters contained in the product. Offers excellent protection for decorative products against surface stress, without altering their appearance and metallic effect.

Details

 


CLEARCOAT GLOSS

Water-Based Protective Clearcoat

Protective clearcoat, available in gloss version, based on polyurethane polymers in a water dispersion, featuring high hardness and excellent adhesion. Non-yellowing and resistant to aggressive external agents, including UV radiation, thanks to protective filters contained in the product. Offers excellent protection for decorative products against surface stress, without altering their appearance and metallic effect.

Details