Long Open Time Glaze

DECORATIVE
GLAZE

Clear decorative product with veiled effect, based on acrylic polymers in a water dispersion.
High open time improves applicability and facilitates use, helping avoid the formation of unsightly seams.

Details   Shop Now

 

Technical  data sheet (pdf)

Category:

SUBSTRATES PREPARATION Substrates must be sound, dry, clean and as smooth as possible. Tape off adjacent surfaces with the proper low tack tape. Patch serious imperfections, deficiencies, etc., with Water-Resistant Gypsum Powder. Apply 2 coats of an eg-shel paint to the colour of choice.
APPLICATION Apply the product to the decorated surface (e.g. washable water-based paint) using the desired tool and technique. Stir the product carefully.

TECHNICAL INFORMATION

COVERAGE: 650-800 sq ft / U.S.gal (Depending on the substrate andthickness applied
DILUTION: ready for use
DRYING:
Touch dry: 4-6  hours
Fully dry: 24 hours
TOOLS: Roller, brush,sponge, glove, etc
TOOLS CLEANING: Clean tools immediately after use with water.
STORAGE TEMPERATURE: Keep the product in a cool place and do not allow to freeze. Do not apply at temperatures below 40°F.
V.O.C.: Max. 350 g/L (2.92 lbs/gal).

Related Products

We suggest these products for a perfect application cycle

GYPSUM POWDER

Water Resistant Stucco in Powder

The Boero Water Resistant, Gypsum Powder is the perfect finishing product for bare sheetrock installed in high humidity and coastal environments. This coating is compatible with water-base primers and paints.
This “industry-first” combination of Boero Water Resistant, Gypsum Powder with Boero Stain Resistant Texture provides a wall and ceiling finishing system that is extremely resistant to the affects continued exposure to water and high humidity. This breathable, mold resistant finishing system is prefect for bathrooms, spa rooms, all ceilings and walls in coastal environments continually exposed to high levels of moisture and constant humidity.

Details

MICRO GRIT PRIMER

Special Primer for Decorative Plasters

High-performance filling masking primer optimized as a base coat before applying stucco paste such as Venetian plaster etc. Easy to apply, it allows an optimal preparation of the wall helping to uniform the support, to mask any small imperfections and to improve the adhesion of the plaster.

 

 

Details

CLEARCOAT MATTE

Water-Based protective Clearcoat

Protective clearcoat, available in matte version, based on polyurethane polymers in a water dispersion, featuring high hardness and excellent adhesion. Non-yellowing and resistant to aggressive external agents, including UV radiation, thanks to protective filters contained in the product. Offers excellent protection for decorative products against surface stress, without altering their appearance and metallic effect.

Details

 

CLEARCOAT GLOSS

Water-Based Protective Clearcoat

Protective clearcoat, available in gloss version, based on polyurethane polymers in a water dispersion, featuring high hardness and excellent adhesion. Non-yellowing and resistant to aggressive external agents, including UV radiation, thanks to protective filters contained in the product. Offers excellent protection for decorative products against surface stress, without altering their appearance and metallic effect.

Details