SUBSTRATES PREPARATION Substrates must be sound, dry, clean and as smooth as possible. Tape off adjacent surfaces with the proper low tack tape. Patch serious imperfections, deficiencies, etc., with Water-Resistant Gypsum Powder.
APPLICATION Apply two coats of product to the decorated surface, leaving at least 3-4 hours (In conditions of high humidity, the above times may increase) between one coat and the next. Stir the product carefully.
TECHNICAL INFORMATION
COVERAGE: 350-450 sq ft / U.S. gal (depending on the substrate and thickness applied)
DILUTION: Add 1 part of water to two parts of powder
DRYING:
Touch dry: 30 min
Re-coating 3/ 4 hours
Fully dry: 24 hours
TOOLS: Roller Brush Spray
TOOLS CLEANING: Clean tools immediately after use with water.
STORAGE TEMPERATURE: Keep the product in a cool place and do not allow to freeze. Do not apply at temperatures below 40°F.
V.O.C.: Max. 100 g/L (0.83 lbs/gal)